AVR online fuse calculator – GUI for avrdude written in Java
Preface
To burn Atmel microcontrollers with Linux you may use avrdude like I do. But sometimes you may wish a more comfortable way to do this without knowing hundreds of command line options and without the need of a calculator to calculate the hex codes for the fuses. Thats why I decided to write a graphical user interface that make it easy to read and write fuses, EEPROM and program memory.
* microcontrolere suportate: ATmega8, ATmega16, ATmega32, ATmega64, ATmega128, ATmega48, ATmega88, ATmega168,ATmega162, ATmega8515, ATmega8335, ATmega164, ATmega324, ATmega644, ATmega169, ATmega329, ATmega3290, ATmega649, ATmega6490, ATtiny2313, ATtiny13, ATtiny25, ATtiny45, ATtiny85, ATtiny26
>> Ii multumesc lui Torsten Brischalle pentru acest applet.
Description
The AVR8 Burn-O-Mat is written in Java. That has the little disadvantage for you that you have to install Java before you can use the AVR8-Burn-O-Mat. But don’t panic, you can download Java for no costs here: http://java.sun.com/javase/downloads
The installation procedure is quite easy. You have to extract the ZIP archive in a directory of your own choice.
The program should be self explaining. First you should take a look at the settings. Make sure that the path to avrdude program and the avrdude configuration file is correct. Next you should select the correct programmer and the port where the programmer is connected. (The supported programmers are read from the file avrdude.conf)
Here is a list with the supported microcontrollers:
ATmega8, ATmega16, ATmega32, ATmega64, ATmega128, ATmega48, ATmega88, ATmega168, ATmega162, ATmega8515, ATmega8335, ATmega164, ATmega324, ATmega644, ATmega169, ATmega329, ATmega3290, ATmega649, ATmega6490, ATtiny2313, ATtiny13, ATtiny25, ATtiny45, ATtiny85, ATtiny26
New microcontrollers can be added easily. All needed informations (for AVR8-Burn-O-Mat) are stored in the file AVR8_Burn_O_Mat_Config.xml. The format of this file should be self explaining.
Contributors
I would like to thank the following people for bug reports, suggestions for improvements or parts of the fuses file:
- Jan Kallwies
- Volker Kretz
- Christian Henz
License:
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/gpl-3.0.html
BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. THE PROGRAM IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.